Questions & Answers

Evo All not shutting vehicle down after brake is pressed.

0 votes
I am only able to turn off the remote start by pressing lock x3, the brake does not work and allows me to drive with no keys. I have options A2-11 engaged. 08 Ford Escape hybrid.
posté Mar 4, 2018 dans la catégorie Ford par nate faldet (180 points)

1 Réponse

+1 vote
Please shut off B2 and retest in the vehicle, this options should not be enabled in your particular installation.

 

Thank you,
répondu Mar 5, 2018 par J M (64,060 points)
That still did not work.

What I have selected:

A1-11

C1

D1 D1.7 D4

G

G1 G2

H2
commenté Mar 8, 2018 par nate faldet (180 points)
Any other ideas?
commenté Mar 19, 2018 par nate faldet (180 points)
Test the black wire on the 20 pin connector, with the vehicle ignition in the on position, if you press the brake do you get any voltage on the black wire?
commenté Mar 19, 2018 par derek g (339,670 points)
You will need to take the module out of standalone mode (disable D1) to perform the test Derek mentioned.
commenté Mar 19, 2018 par J M (64,060 points)
Also can you email us an image of where you connected the Can H and Can L wires at the OBD-II connector, so we can identify which set of Can wires you are currently connected to.

 

Thank you,
commenté Mar 19, 2018 par J M (64,060 points)

Questions associées:

...