Questions & Answers

2015 Toyota Tundra G-key with 3 buttons Open, Close and Panic

0 votes
Dear Tech Support,

I bought an Evo-One for my 2015 Toyota Tundra, the truck has G-key and factory 3 buttons with Open, Close and Panic on it.  I flashed the unit with firmware 79.47, and selected the options C1-OEM Remote Monitoring and D2-Unlock before/Lock after (Disarm OEM alarm) and hit save.  Using wire diagram ver. 20171121 and after i configured the unit as mentioned options above and solder all wires. Follow the key bypass programming procedure, I completed steps 1-4 everything went well as exactly to Manufacturer's procedure described, put the key in On/Run for step 5 the only one LED flashing is the RED.  Also, I noted when flash the unit, the options I saw on the unit are A1-A11, C1  and D2 and no others options like i did the Evo-All unit for my 2013 Lexus RX350 previously.  Don't know what I did wrong but sure do need your guidance to resolve this issue.

Regards,

John
asked May 21, 2018 in Toyota by John Du (240 points)

1 Answer

0 votes
If you are trying to remote start your vehicle by pressing 3xlock on your OEM remotes, you will need to enable Function 38.2 on the remote starter side of the evo-one.
answered May 22, 2018 by J M (64,060 points)
Was able to enable function 38.2.  It's working now.
...