Questions & Answers

2008 infiniti G35 with Compustar

0 votes
Hello,

I have a 2008 infiniti g35, and i recently remove my old compustar cm4000 car starter and alarm and now  i am using a Fortin EVO all with compustar 6000. Everything is running great except on a few items i need help with. (I did not use the T-harness for this vehicle)

1. when the vehicle is running i cannot use my compustar remote to lock or unlock the vehicle. when i press the lock or unlock the compustar remote show that the vehicle is lock or unlock but vehicle door lock does not move. But when i used the infiniti remote i can lock or unlock  door while the vehicle is running. How can i use fix this issue with my compustar remote.

 

2. what do i need to do to use my trunk release button on my compustar remote. when i hold down my irunk button on the infiniti remote, the trunk will pop open. But when i use my compustar remote nothing happen.

 

3. what do i need to do have the front and rear light flash when i lock and unlock the vehicle. on my old system whenever i lock or unlock my front and back light flashes.

 

4. what do i need to do have the  rear light turn on when the car starter is engaged? my front light turn on but now rear light is off?

 

 

Thanks in advance and apologise for all the question
asked Nov 12, 2015 in Infiniti by alexander lim (130 points)

1 Answer

0 votes
Hi Alexander,

Is your vehicle a "Push to Start" (you push an actual "button" to start)or "intellikey"(you turn a knob to start vehicle)? Please look at the 10th digit of your vehicle's serial number to know the exact year of the vehicle and post it here.

 

Depending on your model and year, the evo will either do all those functions via Can-Bus, OR you will need to connect them wire to wire.

 

On your previous remote starter were you able to lock and unlock the vehicle via the compustar remotes? Because if everything worked fine with the old system, then changing the remote starter but using the same connections shouldn't have changed any functions you had before.

 

Thank you.
answered Nov 13, 2015 by J M (64,060 points)

It is a 2008 with push to start.

 

Do you have a schematic wire to wire diagram you can send me or download?

 

the last system has major flaws that why I had to change system. Now all the flaw has been fixed except the ones i listed above.

The EVOONE guide shows the connection for lock, unlock, and parking light. Those connections will fix your problems.
...