T9 not programming though Ft-D100 with EVO-ALL

Question

I have a EVO-ALL installed in a 2014 ford focus hatchback with a key start, and i'm trying to add a compustar T9 rf kit to it. I have installed the FT-D100 (switching the blue and white wire before pluging into the unit) to go between the two and flashed the correct firmware for the unit. When I replug the 4 pin connector and go into the programing mode the lights do not flash. I do get all lights on when in the programing mode but it does not seem to see the remotes.

Answer 1

I'm having the same issue. After a call to Fortin I was told this could be due to the firmware on the ft-d100 decoder. Let me know if you solved this problem please. I am at my wits end trying to get this to work.

Answer 2

Hi did you solve it?

Answer 3

I was able to get it to work on my evo all. The problem I had was the wires connecting the antenna to the evo all needed to be changed, not just the blue and white ones. I will check my wiring tomorrow. The only thing I cant seem to get t ok work is the flashing blue led when the car is locked. I have a 2015 ford focus with the t9.