Questions & Answers

Audi A4 starts by itself after exiting vehicle and doors closed

0 votes
Hello,

I installed the evo all in my 2013 audi a4, with t harness.  Programmed according to instructions.  The issue I have is after driving vehicle, and exiting the vehicle, and closing door, without pressing the oem remote, the vehicle automatically starts by itself.  I can turn it off with oem remote, but why does it start by itself?
posté depuis 21 heures dans la catégorie Audi par Melvin Daoang (130 points)

1 Réponse

0 votes
Hello,

What is the s/n number to the evo-all?

Thank you.
répondu depuis 21 heures par derek g (356,530 points)
Since unit is in vehicle, I located this on box:  001A07 693833.  If this is not the serial #, I apologize, and will need to find time to remove module from vehicle.  Thank you.
Options and firmware look fine, is the vehicle automatic transmission?

Was the yellow/black wire on the 20 pin of the evo-all connected to anything?
Yes it's an automatic. I don't believe the yellow/black is connected to anything. Only wires hardwired to vehicle are the red/black for brake pedal and orange/green and orange/brown for CAN wires.  

By the way on guide #77161, page 5, the green box section lon right side of page has a connection saying to connect only for audi years 20009-2010. I left it disconnected since my vehicle is a 2013.
...