2005 Jeep Grand Cherokee brake wire relay

Question

What relay do I use to wire directly to my brake?  My evo all is not shutting down when the brake is pressed and tech support said I need to wire directly to the brake with a relay to reverse polarity.
 

Thank you.

Answer 1

your brake wire is  white/tan or white/lt. greenm + at brake pedal switch.

Wire the Black wire from Evo one pin A11 to this wire and your done.

Comments

Would this be the same as the evo all?  Tech support told me to wire the bark blue wire on the evo all 20pin connector straight to the brake but I would have to have a relay to reverse polarity because the brake is + and the evo all dark blue is -.

---

I thought it's an Evo One, you could wire the remote starter wire directly to your brake wire is white/tan or white/lt. green + at brake pedal switch.

---

What kind of relay would I use if I were to wire directly to the brake with the dark blue wire for the evo all 20 pin connector? How would I wire it to reverse polarity?  The brake shuts down the motor sometimes but not always. Same with the door trigger.