Questions & Answers

READY MODE

0 votes
Hi Id just installed evo-all with auto start remote start i wired up the bypass following the wiring diagram and flashing the module according to the instruction on the guide manuals so now the problem when i'm doing the process of ready mode when i removed the key the car will turn off ( wrx sti manual trany 2020 standard key evo all by pass auto start remote start )checked the wirings and its good what could be the missing link
posté Oct 21, 2021 dans la catégorie Subaru par Rodel Leonen (130 points)

2 Réponses

0 votes
If you are using datalink. Make sure the EVO-ALL has option F3-D2D enabled and that the autostart is in Expresskit protocol.

 

Also check the autostart diagnostics in the their installation guide or call them.
répondu Oct 21, 2021 par Robert T (300,070 points)
yes it has the  f3 d2d option enabled and I selected the autostart firmware I dont know what else is missing
0 votes
What model of Autostart did you use ?
répondu Oct 22, 2021 par Haidar Jabbar (22,390 points)
AS-1780 I dont know what I'm missing Car has cobb tuning but I tune it to stock though but still I can't get to ready mode any input will be appreciated thanks
Did you program tach.
...