Eco one and analog remote start.

Question

Hi,

How to setup evo one to use analog remout sarter?

Do i need to change evo one setings?

 

SN:002B01 005588

Answer 1

The EVO-ONE is a remote starter. What are trying to do?

Comments

I want to use evo one and gsm remout starter. Evo one is like immo baypass modul.

When blue wire is graunded the evo one wount baypass immo.

---

The EVO-ONE is a remote starter with integrated bypass module. The ground when running on the EVO-ONE is in ouput not an input.


If you want a transponder bypass only module, you need the EVO-ALL.

---

But how i control evo one to remout start. Whits wire is neet to use to control evo one remoutstarter.

---

The EVO-ONE can be controlled with a variety of RF-KITs : https://fortin.ca/en/technology/rf_kits.html

 
It can also be controlled by the factory remote on some vehicles : https://fortin.ca/en/features/3x_lock_remote_starter_%28evo-one%29.html

---

I cant use gsm module whit analog outbuts?

---

There's no analog inputs on the EVO-ONE for GSM modules. It has to be datalink and tested. If it is not listed on the RF page, it will not work. i think you have just misundertand how everything works.

---

you can actually try this.....

• update to the latest firmware 1.15 in the remote starter EVO-ONE updates
• activate option 38.3 in the remote starter options
• use the middle pin of the shock sensor connector to activate or deactivate the starter. You need a ground pulse, not a constant signal.

---

OK.

Thanke you.