Alarm activation when locking with OEM Fob

Question

I have an EVO ONE with alarm system activated ( with connected to the Horn ), I donot have any OEM alarm from the manufacturer, My car is nissan qashqai with push button. Alarm used to be activated when i locked the car using OEM fob or door button ( If i recall correctly ), Now it is only working when locking with RF kit remote ( crimestopper ) while it doesnot trigger the alarm when locking with OEM fob . Is there any programmable option that i did my mistake or i am missing to restore the orignial feature. I want the alarm to be activated whenever the vehicle is locked from any source ( door button or OEM fob or RF kit remote ) thanks in advance It is S/N : 001A07026604 and i am using a T harness

Answer 1

should be simple. Try disconnecting and reconnecting your vehicles battery.

Comments

So there is no programmable option to tell the EVO to activate the alarm only if locking came from the RF kit ? Cause if there is such a thing then i would need to disable it Also bear with me for my ignorance, what would the battery reset trial do as a function to the EVO in this case ?

---

option C1 is what tells the module to monitor the oem remote. It shows as enabled in your module.  When locking/unlocking, the blue led shold flash o nthe evo indicating it is detecting the oem remote commands. 1 flash for lock, 2 flash for unlock

 

Disconnec the battery is to reset the keyless on the car.

---

Option 38.4 is a EVO-ONE option. It's an evo-one you have or evo-all? The service number you gave was for an EVO-ALL.

 

Im confused :D  but either way, you are correct with option 38.4 if using an evo-one

---

I ad earlier an EVO All then swapped it with EVO ONE so i can have the dedicated alarm feature. Apologies seems i have sent to you the EVO all SN and not the EVO ONE. You were correct as it did work using feature 38.4 indeed