Questions & Answers

2019 & 2017 Toyota Tundra crank no start, starts sometimes

0 votes
I had 2 installation today on 2019 & 2017 Toyota Tundra, both had same issue. Both trucks would crank only with no start. But sometimes it would start during the first remote start attempt and sometimes it would start on the 2ed attempt after the first attempt timed out. I used a crimestopper RS4-G5 with an Evo-All. I have installed many units over the years and I dont think it is a coincidence that I had the same issue with both trucks. Is there anything I could have done wrong for this to happen. I even changed the communication protocals on to see if that would help and it did not.
posté Dec 5, 2021 dans la catégorie Toyota par Ariel Taveras (630 points)

1 Réponse

0 votes
What are the S/N numbers to the modules in question?

 

It may be related to how they were flashed/configured.
répondu Dec 6, 2021 par derek g (340,240 points)
SN: 001A07033022

SN: 001A07033008
commenté Dec 6, 2021 par Ariel Taveras (630 points)
turn off d2 in both units and re test.
commenté Dec 6, 2021 par derek g (340,240 points)
Ok I will try it during the weekend. Can you explain why that would fix the issue? I dont understand how that would work. The trucks OEM alarms did go off like twice during remote start attempts.

Thank you
commenté Dec 7, 2021 par Ariel Taveras (630 points)
The evo may not be given enough time by the remote starter to both dis arm the veicle and provide immo data/can data. Turning off D2 will allow the evo to just send imo and can. If that fixes it, I would simply connect the dis arm wire from your starter to the vehicle.
commenté Dec 7, 2021 par derek g (340,240 points)

Questions associées:

...